Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 142
show ip bgp
Use the show ip bgp command to display a summary of the BGP table.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Functional Notes
Entries that are not filtered by prefix lists are marked with an asterisk (*) to show they are valid. Entries
that are deemed the best path to advertised route are marked with a caret (>).
Usage Examples
The following shows sample output of the command:
#show ip bgp
BGP local router ID is 10.0.0.1, local AS is 101.
Status codes: * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network NextHop Metric Path
*> 1.0.0.0/8 10.15.43.17 1 100 i
*> 2.0.0.0/9 10.15.43.17 1 100 i
*> 2.128.0.0/10 10.15.43.17 1 100 i