Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
141142143144145146147148149150
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 141
show ip arp
Use the show ip arp command to display the Address Resolution Protocol (ARP) table.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample output of the
show ip arp
command:
>enable
#
show ip arp
ADDRESS TTL (min) MAC ADDRESS INTERFACE
10.15.225.162.14 14 00:12:79:11:69:11 eth 0/1