Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 135
show interfaces adsl <slot/port> information [atuc | atur |
bit-allocation]
Use the show interfaces adsl command to display information related to the ADSL port.
Syntax Description
<slot/port> Enter interface slot and port number.
atuc Show ADSL interface remote information.
atur Show ADSL local information.
bit-allocation Show ADSL DMT bit-allocation table.
Default Values
No default is necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example shows sample output for this command:
#show interfaces adsl 0/1 information
adsl 0/1 line information
adsl 0/1 Local Line Information
Vendor Id: 4144544E
Serial Number: EngBetaREVC01D
Firmware Version:
ADSL Capabilities G.DMT, G.LITE, ADSL2, ADSL2+
adsl 0/1 Remote Line Information
Vendor Id: 54535443
Serial Number: 00000000
Firmware Version: 1
ADSL Capabilities G.DMT, G.LITE, ADSL2, ADSL2+