Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 130
show frame-relay multilink <interface> detailed
Use the show frame-relay multilink command to display information associated with the Frame Relay
multilink interface.
Syntax Description
<interface> Optional. Specifies the display of information for a specific interface. Enter the
show frame-relay multilink ? command for a complete list of interfaces.
detailed Optional. Use this optional keyword to display more detailed information.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample output from this command:
>enable
#show frame-relay multilink
Bundle: frame-relay 1 is DOWN; class A bundle
Near-end BID: MFR1; Far-end BID: unknown