Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 128
show frame-relay fragment [frame-relay <port.sublink>]
Use the show frame-relay fragment command to display FRF.12 statistics for Frame Relay sublinks
enabling FRF.12 fragmentation.
Syntax Description
frame-relay <port.sublink> Displays detailed FRF.12 statistics for the specified frame-relay sublink (if
FRF.12 is enabled on that sublink).
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following are sample outputs from various show frame-relay fragment commands:
>enable
# show frame-relay fragment
interface dlci frag_size rx_frag tx_frag dropped_frag
fr 1.1 17 100 46 48 0
fr 1.2 18 200 42 21
0