Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 126
show frame-relay
Use the show frame-relay command to display configuration and status parameters for configured virtual
Frame Relay interfaces.
Variations of this command include the following:
show frame-relay lmi
show frame-relay pvc
show frame-relay pvc interface frame-relay <interface>
Syntax Description
lmi Displays LMI (Link Management Interface) statistics for each virtual Frame Relay
interface
pvc Displays PVC (Permanent Virtual Circuit) configuration and statistics for all virtual
Frame Relay interfaces (or a specified interface)
frame-relay Optional keyword used to display Frame Relay PVC statistics for a specific Frame
Relay interface.
<interface> Specifies the virtual Frame Relay interface (for example fr 1)
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following are sample outputs from various show frame-relay commands:
>enable
# show frame-relay lmi
LMI statistics for interface FR 1 LMI TYPE = ANSI
Num Status Enq. Sent 79 Num Status Msgs Rcvd 71
Num Update Status Rcvd 12 Num Status Timeouts 5
#
show frame-relay pvc
Frame Relay Virtual Circuit Statistics for interface FR 1