Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 123
show dynamic-dns
Use the show dynamic-dns command to show information related to the dynamic DNS configuration.
Syntax Description
No subcommands.
Default Values
No default is necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is sample output from this command:
#show dynamic-dns
eth 0/1:
Hostname: host
Is Updated: no
Last Registered IP: 10.15.221.33
Last Update Time: 00:00:00 UTC Thu Jan 01 1970