Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
111112113114115116117118119120
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 118
show crypto ipsec
Use the show crypto ipsec command to display information regarding the IPSec configuration.
Variations of this command include the following:
show crypto ipsec sa
show crypto ipsec sa address <ip address>
show crypto ipsec sa map <mapname>
show crypto ipsec transform-set
show crypto ipsec transform-set <transform-set name>
Syntax Description
sa Displays all IPSec security associations.
address
<ip address>
Displays all IPSec security associations associated with the designated peer IP
address.
map
<mapname>
Displays all IPSec security associations associated with the designated crypto
map name.
transform-set Displays all defined transform-sets.
<transform-set name>
Displays information for a specific transform-set.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode