Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 116
show crypto ike
Use the show crypto ike command to display information regarding the IKE configuration.
Variations of this command include the following:
show crypto ike client configuration pool
show crypto ike client configuration pool <poolname>
show crypto ike policy
show crypto ike policy <policy priority>
show crypto ike remote-id <remote-id>
show crypto ike sa
Syntax Description
client configuration Displays the list of all configured IKE client configuration pools.
pool
<poolname> Displays detailed information regarding the specified IKE client configuration pool.
policy Displays information on all IKE policies. Indicates if client configuration is enabled
for the IKE policies and displays the pool names.
< policy priority> Displays detailed information on the specified IKE policy. This number is assigned
using the crypto ike policy command. See
crypto ike on page 223 for more
information.
remote-id
<remote-id> Displays information on all IKE information regarding the remote-id. The remote-id
value is specified using the crypto ike remote-id command (see
crypto ike
remote-id
on page 227).
sa Displays the configuration of active IKE security associations.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode