Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 110
show cflash
Use the show cflash command to display a list of all files currently stored in CompactFlash® memory.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample show flash output:
>enable
#show cflash
(dir) 0 SystemDefaultPrompts
(dir) 0 VoiceMail
(dir) 0 UserPrompts
4043024 J01_01_03.BIZ
285188 J01_01_03-boot.biz
2649600 J01_01_02.biz
3154 startup-config
3714 test
3130 EUT4bindcfg.txt
2896 EUT2bindcfg.txt
2828 EUT1bindcfg.txt
2994 EUT3bindcfg.txt
7026688 bytes used, 120893440 available, 127920128 total