Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 109
show buffers users
Use the show buffers users command to display a list of the top users of packet buffers. Typically, this
command will only be used as a debug tool.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample from the show buffers users command:
>enable
#show buffers users
Number of users: 7
Rank User Count
1 0x0052f4f8 59
2 0x0051a4fc 32
3 0x00528564 8
4 0x0053c1c8 7
5 fixedsize 5
6 0x001d8298 2
7 0x0010d970 1
8 0x00000000 0
9 0x00000000 0
10 0x00000000 0
11 0x00000000 0
12 0x00000000 0
13 0x00000000 0
14 0x00000000 0
15 0x00000000 0