Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 108
show buffers
Use the show buffers command to display the statistics for the buffer pools on the network server.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
> or # Basic or Enable Command Mode
Usage Examples
The following is a sample output from the show buffers command:
#show buffers
Buffer handles: 119 of 2000 used.
Pool Size Total Used Available Max. Used
0 1800 1894 119 1775 122
1 2048 64 0 64 0
2 4096 32 0 32 0
3 8192 4 0 4 0
4 16384 2 0 2 0
5 32768 2 0 2 0
6 65536 2 0 2 0