Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 107
show bridge [ethernet | frame-relay | ppp | vlan] <slot/port> <bridge
group #>
Use the show bridge command to display a list of all configured bridge groups (including individual
members of each group). Enter an interface or a bridge number to display the corresponding list.
Syntax Description
ethernet <slot/port> Optional. Display all bridge groups associated with the Ethernet interface.
frame-relay <slot/port> Optional. Display all bridge groups associated with the Frame Relay virtual
interface.
ppp <slot/port> Optional. Display all bridge groups associated with the PPP virtual interface.
vlan <slot/port> Optional. Displays all bridge groups associated with the VLAN interface.
<bridgegroup#>
Display a specific bridge group
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample output from the show bridge command:
>enable
# show bridge
Total of 300 station blocks 295 free
Address Action Interface Age Rx Count Tx Count
00:04:51:57:4D:5A
00:04:5A:57:4F:2A
00:10:A4:B3:A2:72
00:A0:C8:00:8F:98
00:E0:81:10:FF:CE
forward
forward
forward
forward
forward
eth 0/1
eth 0/1
eth 0/1
eth 0/1
fr 1.17
0
0
4
0
0
7133392
402365
2
412367
1502106
7042770
311642
0
231
1486963