Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
101102103104105106107108109110
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 105
show arp
Use the show arp command to display the Address Resolution Protocol (ARP) table.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following is a sample output of the
show arp
command:
>enable
#
show arp
ADDRESS TTL (min) MAC ADDRESS INTERFACE
10.15.225.162 16 00:12:79:11:69:11 eth 0/1