Command Reference Guide

SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 103
reload [cancel | in <delay>]
Use the reload command to preform a manual reload of the Secure Router OS.
Syntax Description
cancel Optional. Use the cancel keyword to deactivate a pending reload command.
in Optional. Use the in keyword to specify a delay period the Secure Router OS will
wait before
reloading.
<delay> Specifies the delay period in minutes (mmm) or hours and minutes (hh:mm).
Default Values
No default value necessary for this command.
Command Modes
# Enable Command Mode
Usage Examples
The following example reloads the Secure Router OS software in 3 hours and 27 minutes:
>enable
#reload in 03:27
The following example reloads the Secure Router OS software in 15 minutes:
>enable
#reload in 15
The following example terminates a pending reload command:
>enable
#reload cancel
Caution
Performing a reload disrupts data traffic.