Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 7000 dl Router Series
101102103104105106107108109110
SROS Command Line Interface Reference Guide Enable Mode Command Set
5991-2114 © Copyright 2005 Hewlett-Packard Development Company, L.P. 101
events
Use the events command to enable event reporting to the current CLI session. Use the no form of this
command to disable all event reporting to the current CLI session.
Syntax Description
No subcommands.
Default Values
By default, this command is enabled.
Command Modes
# Enable Command Mode
Usage Examples
The following example enables event reporting:
>enable
#events