Maintenance and Service Guide

Battery

Description Spare part number

Battery: 3000-mAh, USB-charging (includes cable and double-sided adhesive) 781104-001

Before removing the battery, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the SIM slot cover (see

SIM slot cover on page 13).

5. Remove the back cover (see

Back cover on page 14).

6. Remove the middle frame (see

Middle frame on page 16).

WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a

replacement battery provided by HP, or a compatible battery purchased from HP.

CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of

information. To prevent loss of information, save your work or shut down the tablet through the

operating system before removing the battery.

Remove the battery:

1. Disconnect the battery cable (1) from the system board.

2. Insert a case utility tool (2) or similar thin tool between the battery and the

display panel assembly, and then detach the battery from the display panel assembly. (The battery

is attached to the display panel assembly with double-sided adhesive.)

Battery