Hardware Reference Guide
Table Of Contents
- Product features
- Setup
- Hardware upgrades
- Serviceability features
- Warnings and cautions
- Removing and installing the access panel
- Removing and installing the access panel of the HP EliteDesk 800 35W
- Upgrading system memory
- Removing a hard drive
- Installing a hard drive
- Replacing an M.2 PCIe solid-state drive
- Replacing the WLAN module
- Installing an external antenna
- Replacing the battery
- Synchronizing the optional wireless keyboard and mouse
- Electrostatic discharge
- Computer operating guidelines, routine care and shipping preparation
- Accessibility
- Index
6. Tilt the fan up using the front tab and leave it in the up position.
NOTE: It is not necessary to fully remove the fan to remove or install a memory module.
7. Locate the memory modules on the system board.
8. To remove a memory module, press outward on the latches (1) on each side of the memory module, and
then pull the memory module (2) out of the slot.
Upgrading system memory 17