Hardware Reference Guide
Table Of Contents
- Product features
- Setup
- Hardware upgrades
- Serviceability features
- Warnings and cautions
- Removing and installing the access panel
- Removing and installing the access panel of the HP EliteDesk 800 35W
- Upgrading system memory
- Removing a hard drive
- Installing a hard drive
- Replacing an M.2 PCIe solid-state drive
- Replacing the WLAN module
- Installing an external antenna
- Replacing the battery
- Synchronizing the optional wireless keyboard and mouse
- Electrostatic discharge
- Computer operating guidelines, routine care and shipping preparation
- Accessibility
- Index
Installing a security cable
The security cable displayed below can be used to secure the computer.
NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being
mishandled or stolen.
Connecting the power cord
When connecting the AC adapter, it is important to follow the steps below to ensure that the power cord does
not pull free from the computer.
1. Connect the power cord to the AC adapter (1).
2. Plug the power cord into an AC outlet (2).
3. Connect the AC adapter to the power connector on the rear of the computer (3).
8 Chapter 2 Setup