Hardware Reference Guide
Table Of Contents
- Product features
- Hardware upgrades
- Serviceability features
- Warnings and cautions
- Removing the computer access panel
- Replacing the computer access panel
- Removing the front bezel
- Removing bezel blanks
- Replacing the front bezel
- Removing and installing the optional front bezel dust filter
- System board connections
- Upgrading system memory
- Removing or installing an expansion card
- Drive positions
- Removing and Installing drives
- Installing a security lock
- Battery replacement
- Electrostatic discharge
- Computer operating guidelines, routine care and shipping preparation
- Accessibility
- Index
6. Remove the 6-32 security screw from the inside of the front bezel.
7. Replace the front bezel.
8. Install the 6-32 security screw through the front of the chassis and into the screw hole located below
the center bezel release tab.
9. Replace the computer access panel.
10. Reconnect the power cord and any external devices, and then turn on the computer.
11. Lock any security devices that were disengaged when the access panel was removed.
Installing a security lock 49