Hardware Reference Guide
Table Of Contents
- Product features
- Hardware upgrades
- Serviceability features
- Warnings and cautions
- Removing the computer access panel
- Replacing the computer access panel
- Removing the front bezel
- Removing bezel blanks
- Replacing the front bezel
- Removing and installing the optional front bezel dust filter
- System board connections
- Upgrading system memory
- Removing or installing an expansion card
- Drive positions
- Removing and Installing drives
- Installing a security lock
- Battery replacement
- Electrostatic discharge
- Computer operating guidelines, routine care and shipping preparation
- Accessibility
- Index
6. Disconnect the power cable (1) and data cable (2) from the rear of the hard drive.
7. Pull the release lever at the rear of the drive outward (1) and lift the rear of the drive up (2). Then slide
the front of the drive back until it stops and pull the drive up and out of the drive bay (3).
36 Chapter 2 Hardware upgrades