Hardware Reference Guide
Table Of Contents
- Product features
- Hardware upgrades
- Serviceability features
- Warnings and cautions
- Removing the computer access panel
- Replacing the computer access panel
- Removing the front bezel
- Removing bezel blanks
- Replacing the front bezel
- Removing and installing the optional front bezel dust filter
- System board connections
- Upgrading system memory
- Removing or installing an expansion card
- Drive positions
- Removing and Installing drives
- Installing a security lock
- Battery replacement
- Electrostatic discharge
- Computer operating guidelines, routine care and shipping preparation
- Accessibility
- Index
– Install four 6-32 silver-and-blue mounting screws in the adapter bracket (two on each side of
the bracket).
7. Align the mounting screws on the front of the hard drive with the slots on the drive cage and press the
front of the drive down and forward into the bay (1). Then press the rear of the drive down into the drive
bay (2) to lock it in place.
34 Chapter 2 Hardware upgrades