Hardware Reference Guide
Table Of Contents
- Product features
- Hardware upgrades
- Serviceability features
- Warnings and cautions
- Removing the computer access panel
- Replacing the computer access panel
- Removing the front bezel
- Removing bezel blanks
- Replacing the front bezel
- Removing and installing the optional front bezel dust filter
- System board connections
- Upgrading system memory
- Removing or installing an expansion card
- Drive positions
- Removing and Installing drives
- Installing a security lock
- Battery replacement
- Electrostatic discharge
- Computer operating guidelines, routine care and shipping preparation
- Accessibility
- Index
6. Disconnect the power cable (1) and data cable (2) from the rear of the hard drive.
7. Pull the release lever next to the rear of the hard drive outward (1). While pulling the release lever out,
lift the rear of the drive up (2), and then slide the front of the drive back and lift it out of the bay (3).
Removing and Installing drives 31