Hardware Reference Guide
Table Of Contents
- Product features
- Hardware upgrades
- Serviceability features
- Warnings and cautions
- Removing the computer access panel
- Replacing the computer access panel
- Removing the front bezel
- Removing bezel blanks
- Replacing the front bezel
- Removing and installing the optional front bezel dust filter
- System board connections
- Upgrading system memory
- Removing or installing an expansion card
- Drive positions
- Removing and Installing drives
- Installing a security lock
- Battery replacement
- Electrostatic discharge
- Computer operating guidelines, routine care and shipping preparation
- Accessibility
- Index
3. To remove the dust lter, use your ngers to separate the lter from the front bezel at the tab locations
shown below.
4. Use a soft brush or cloth to clean dust from the lter. If heavily soiled, rinse the lter clean with water.
5. To replace the dust lter, press the lter rmly onto the front bezel at the tab locations shown below.
6. Reconnect the power cord and any external devices, and then turn on the computer.
Removing and installing the optional front bezel dust lter 11