User's Manual

A Technical specications
NOTE: All specications represent the typical specications provided by HP's component manufacturers;
actual performance can vary either higher or lower.
For the latest specications or additional specications on this product, go to http://www.hp.com/go/
quickspecs/ and search for your specic model to nd the model-specic QuickSpecs.
Table A-1 Technical specications
Specication Measurement
Display, wide-screen
Panel type
68.47 cm
TN LCD
27 in.
Viewable image size 68.47 cm, diagonal 27 in., diagonal
Tilt -5° to 23°
Height adjustment 0 mm to 130 mm 0 in. to 5.12 in.
Weight (with stand) 7.18 kg 15.83 lb
Dimensions (including stand)
Height
Depth
Width
53.36 cm
27.25 cm
61.36 cm
21.01 in.
10.73 in.
24.16 in.
Maximum graphic resolution 2560 × 1440 @ 240 Hz
Optimum graphic resolution 2560 × 1440 @ 240 Hz
Static contrast ratio 1000:1 typical
Dynamic contrast ratio 10,000,000:1
Dot pitch 0.2331 (H) mm × 0.2331 (V) mm
Pixels per inch 109.0 PPI
Horizontal scan rate 30–355 kHz
Vertical scan rate 48–240 Hz
Response time The default response time for the monitor is 3.5 ms. You can adjust
the response time to as fast as 1 ms in the OSD menu. All
performance specications represent the typical specications
provided by HP’s component manufacturers; actual performance
can vary either higher or lower.
Environmental requirements
Temperature
Operating temperature
Non–operating temperature
Relative humidity
5°C to 35°C
-34°C to 60°C
20% to 80%
41°F to 95°F
-29°F to 140°F
23