User's Manual

Attaching the VESA mounting bracket
A VESA mounting bracket is included with the monitor for use when attaching the monitor head to a wall,
swing arm, or other mounting xture.
1. Remove the monitor stand if it is attached. See Removing the monitor stand on page 5.
2. Insert the VESA mounting bracket into the slot on the back of the monitor head’s hinge to secure the
bracket to the monitor head. There will be an audible click when the bracket is properly seated onto the
hinge. Make sure that the bracket is properly secured to the monitor head before use.
3. To attach the monitor head to a swing arm or other mounting device, insert four mounting screws
through the holes on the mounting device and into the screw holes on the VESA mounting bracket.
IMPORTANT: Follow the mounting device manufacturer’s instructions when mounting the monitor to a
wall or swing arm.
6 Chapter 1 Getting started