Datasheet

Speakers

Description Spare part number

Speaker Kit (includes left and right speakers and cable) 686598-001

Before removing the speakers, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the base enclosure (see

Base enclosure on page 43).

5. Disconnect the battery cable (see

Battery on page 44).

Remove the speakers:

1. Turn the computer, with the front edge toward you.

2. Release the 2 Phillips PM 2.0×3.0 screws securing each speaker. (1)

3. Remove the speakers and cables (2).

Reverse this procedure to install the speakers.

Component replacement procedures