Datasheet

●
Fan (see
Fan-Heat sink on page 62)
●
Heat sink (see
Fan-Heat sink on page 62)
●
WLAN module see (
WLAN module on page 53).
●
Hard drive (see
Hard drive on page 46).
●
USB/Audio (see USB/Audio)
Remove the system board:
1. Remove the following cables:
●
Power connector cable (1)
●
Speaker cable (2)
●
Subwoofer cable (3)
●
USB/Audio board cable (4)
●
Keyboard cable (5)
●
Keyboard light cable (6)
●
TouchPad board cable (7)
●
Wireless cable (8)
●
Display panel cable (9)
●
Power button board cable (10)
2. Remove the 4 Phillips PM 2.5x3 screws (1) until the system board rests at an angle.
Component replacement procedures
61