User Manual
Table Of Contents
- Locating HP resources
- Computer features
- Backing up, restoring, and recovering
- Using HP PC Hardware Diagnostics
- Using HP PC Hardware Diagnostics Windows (select products only)
- Using HP PC Hardware Diagnostics UEFI
- Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
- Specifications
- Computer operating guidelines, routine care, and shipping preparation
- Electrostatic discharge
- Accessibility
- Index
Cable lock
You can secure the computer with a security cable lock.
Padlock
You can secure the computer with a padlock.
1. Pull out on the padlock loop (1).
2. Insert a padlock into the padlock loop (2) and close the lock.
Attaching the computer to a mounting
xture
The computer can be attached to a wall, swing arm, or other mounting xture.
NOTE: This apparatus is intended to be supported by a UL- or CSA-Listed wall-mount bracket.
1. If the computer is on a stand, remove the computer from the stand, and position the computer right-side
up on a stable surface.
2. To attach the computer to a swing arm (sold separately), insert four screws through the holes on the
swing arm plate and into the mounting holes on the computer.
CAUTION: This computer supports the VESA® industry standard 100 mm mounting holes. To attach a
third-party mounting solution to the computer, use the screws that are supplied with the solution. Be
8
Chapter 2 Computer features