User Manual
Table Of Contents
- Locating HP resources
- Computer features
- Backing up, restoring, and recovering
- Using HP PC Hardware Diagnostics
- Using HP PC Hardware Diagnostics Windows (select products only)
- Using HP PC Hardware Diagnostics UEFI
- Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
- Specifications
- Computer operating guidelines, routine care, and shipping preparation
- Electrostatic discharge
- Accessibility
- Index
Table 2-4 Identifying the rear panel components
Rear panel components
1 Thumbscrew 7 USB Type-A ports (2)
2 Security lock 8 VGA port
3 Optional port 9 HDMI port
4 External antenna 10 RJ-45 (network) jack
5 Serial port 11 Power connector
6 USB Type-A ports (2) 12 Padlock loop
NOTE: Your model might have additional ports available from HP.
When a graphics card is installed in one of the system board slots, you can use the video connectors on the graphics card or the
integrated graphics on the system board. The specic graphics card installed and software conguration determine the behavior.
You can disable the system board graphics by changing settings in BIOS F10 Setup.
Serial number location
Each computer has a unique serial number and a product ID number that are located on the exterior of the
computer. Keep these numbers available when contacting customer service for assistance.
Installing a security lock
You can use the following security locks to secure the computer.
Serial number location
7