Specifications

Remove the fan:
1. Disconnect the fan cable (1) from the system board, loosen the two captive screws (2), and then
remove the fan.
2. Remove the heat sink assembly:
NOTE: Due to the adhesive quality of the thermal material located between the heat sink
assembly and the system board components, it may be necessary to move the heat sink
assembly from side to side to detach it.
●
For computer models equipped with Intel UMA graphics, following the 1 through 4
sequence stamped into the processor heat sink, loosen the four Phillips captive screws that
secure the processor heat sink to the system board, and then remove the heat sink (2).
86 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts