Specifications

Display assembly
NOTE: The display assembly is spared as a whole unit assembly only.
Description Spare part number
15.6-in WLED FHD, UWVA display assembly equipped with a webcamera
15.6-in WLED HD, UWVA display assembly equipped with a webcamera
739998-001
739997-001
14-in HD AG WLED SVA eDP FLT display panel equipped with a webcamera
14-in HD+ AG WLED SVA eDP FLT equipped with a webcamera
14-in FHD AG WLED UWVA eDPslim PSR display assembly equipped with a webcamera
747751-001
747752-001
747753-001
To remove the display assembly and access the display assembly subcomponents, follow
these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 63).
Remove the display assembly:
1. Open the computer.
2. If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Flex the inside edges of the top edge (1), the left and right sides (2), and the
bottom edge (3) of the display bezel until the bezel disengages from the display enclosure.
b. Remove the display bezel (4).
The display bezel is available using spare part numbers 734301-001 (for use only on
computer models equipped with a webcamera) and 734302-001 (for use only on computer
models not equipped with a webcamera).
Display assembly 115