User guide

Figure 9 HSV450 controller rear view
6. DPI ports1. Serial port
7. Mirror ports2. Unit ID
8. Fiber ports3. Controller health
9. Power supply 14. Fault indicator
10. Power supply 25. Power
Figure 10 Controller front view
5. Operator Control Panel (OCP)1. Battery 1
6. Status indicators2. Battery 2
7. Unit ID3. Blower 1
4. Blower 2
Operator control panel
The operator control panel (OCP) provides a direct interface to each controller. From the OCP you
can display storage system status and configuration information, shut down the storage system,
and manage the password.
The OCP includes a 40-character LCD alphanumeric display, six push-buttons, and five status
indicators. See Figure 11 (page 15).
HP P6000 Command View is the tool you will typically use to display storage system status and
configuration information or perform the tasks available from the OCP. However, if HP P6000
Command View is not available, the OCP can be used to perform these tasks.
14 EVA6400/8400 hardware