Specifications

4. Remove the battery (see Battery on page 49).
5. Remove the following components:
a. Hard drive (see
Hard drive on page 60)
b. Optical drive (see
Optical drive on page 56)
c. Keyboard (see
Keyboard on page 65)
d. Modem module (see
Modem module on page 70)
e. Fan (see
Fan on page 74)
f. Heat sink (see
Heat sink on page 75)
g. Base enclosure (see
Base enclosure on page 79)
h. Display assembly (see
Display assembly on page 84)
i. System board (see
System board on page 91)
Remove the Wireless/web/mute function board assembly:
1. Position the top cover upside-down, with the front toward you.
2. Remove the single Phillips PM2.5×3.0 screw (1) that secures the assembly to the top cover.
3. Remove the Wireless/web/mute function board and cable (2) from the top cover.
Reverse this procedure to install the Wireless/web/mute function board assembly.
Component replacement procedures 97