User Manual

IPv6 Access Control Lists (ACLs)
Configuration Commands
0 - 63: Select a specific DSCP codepoint by entering its
decimal equivalent. (Refer to table 8-4, “DSCP Codepoints
with Decimal Equivalents” on page 8-51
Assured Forwarding (AF) codepoint matches:
AF DSCP AF DSCP
Match Match
af11 001010 af31 011010
af12 001100 af32 011100
af13 001110 af33 011110
af21 010010 af41 100010
af22 010100 af42 100100
af23 010110 af43 100110
default: Matches with the 000000 (default) DSCP.
ef: Expedited Forwarding (EF; 000000) DSCP match.
precedence: Supports selection of a precedence setting in the
DSCP.
Option Precedence Name
Bits
cs1 001 priority
cs2 010 immediate
cs3 011 flash
cs4 100 flash-override
cs5 101 critical
cs6 110 internet (for internetwork control)
cs7 111 network (for network control)
Note: The precedence criteria described in this section are
applied in addition to
any other selection criteria configured
in the same ACE. Also, where dscp is configured in a given
ACE, the established keyword and the optional TCP control bits
cannot be configured.
8-50