User Manual

Command Min. Level Page
ipv6 nd dad-attempts < 0 - 600 > Global Config 4-18
ipv6 nd ns-interval < 1000 - 3600000 > VLAN Config 4-19
ipv6 nd reachable-time < 1000 - 2147483647 > VLAN Config 4-19
show ipv6 neighbors Operator 5-2
show ipv6 nd Operator 4-24
show ipv6 route Operator 4-30
show ipv6 routers Operator 4-31
snmp-server host < ipv6-addr >
* Global Config 5-25
MLD
ipv6 mld VLAN Config 7-8
ipv6 mld [< auto | blocked | forward > < port-list >] VLAN Config 7-9
ipv6 mld fastleave < port-list > VLAN Config 7-10
ipv6 mld forcedfastleave < port-list > VLAN Config 7-11
ipv6 mld querier VLAN Config 7-10
show ipv6 mld vlan < vid > Operator 7-12
config Operator 7-15
group [ ipv6-addr ]
* Operator 7-17
statistics Operator 7-18
counters Operator 7-20
SSH
ip ssh [cipher | filetransfer | mac | port | public-key | timeout | listen] Global Config 6-20
Telnet
show console Operator 5-9
show telnet Operator 5-7
telnet < ipv6-addr >
* Manager 5-6
Timep
ip timep dhcp Global Config 5-15
ip timep manual < ipv6-addr >
* Global Config 5-15
show sntp Manager 5-13
show timep Manager 5-16
sntp server priority < 1 - 3 > < ipv6-addr >
* Global Config 5-11
*A link-local address in these commands must include %vlan< vid > as a suffix. For example,
fe80::110:252%vlan20.
xvii