User Manual
Table Of Contents
- Product description
- Components
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for Customer Self-Repair parts
- Removal and replacement procedures for authorized service provider parts
- Computer Setup (BIOS), TPM, and HP Sure Start
- Backing up, restoring, and recovering
- Using HP PC Hardware Diagnostics
- Using HP PC Hardware Diagnostics Windows (select products only)
- Using HP PC Hardware Diagnostics UEFI
- Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
- Specifications
- Statement of memory volatility
- Power cord set requirements
- Recycling
- Index
17. If you need to remove the display cable, disconnect the cable from the ZIF connector on the hub board
(1), remove the cable from the clips at the bottom of the display back cover (2), and then remove the
cable (3).
The display panel cable is available as spare part number M07203-001.
18. If you need to remove the camera cable, disconnect the cable from the ZIF connector on the hub board
(1), and then peel the cable o the inside of the display back cover to remove it (2).
The camera cable is available in the Cable Kit as spare part number M07101-001.
70 Chapter 6 Removal and replacement procedures for authorized service provider parts