User Manual
Table Of Contents
- Product description
- Components
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for Customer Self-Repair parts
- Removal and replacement procedures for authorized service provider parts
- Computer Setup (BIOS), TPM, and HP Sure Start
- Backing up, restoring, and recovering
- Using HP PC Hardware Diagnostics
- Using HP PC Hardware Diagnostics Windows (select products only)
- Using HP PC Hardware Diagnostics UEFI
- Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
- Specifications
- Statement of memory volatility
- Power cord set requirements
- Recycling
- Index
e. Insert the top of the panel into the top of the display rear cover (6), and then rotate the panel into
place (7). Be sure that the upper corners of the panel are positioned up against the insides of the
alignment tools.
The double-sided adhesive strips are available as spare part number M14479-001.
f. Remove the alignment tool.
g. Replace the bezel by pressing along the bottom, sides, and then top of the bezel to snap it into
place.
Component replacement procedures 65