User Manual
Table Of Contents
- Product description
- Components
- Illustrated parts catalog
- Removal and replacement procedures preliminary requirements
- Removal and replacement procedures for Customer Self-Repair parts
- Removal and replacement procedures for authorized service provider parts
- Computer Setup (BIOS), TPM, and HP Sure Start
- Backing up, restoring, and recovering
- Using HP PC Hardware Diagnostics
- Using HP PC Hardware Diagnostics Windows (select products only)
- Using HP PC Hardware Diagnostics UEFI
- Using Remote HP PC Hardware Diagnostics UEFI settings (select products only)
- Specifications
- Statement of memory volatility
- Power cord set requirements
- Recycling
- Index
2. Use a tool (2) to release the battery from the computer (3).
Reverse this procedure to install the RTC battery.
Speakers
To remove the speakers, use this procedure and illustration.
Table
6-3 Speaker description and part number
Description Spare part number
Speaker Kit M07107-001
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 33).
2. Remove the bottom cover (Bottom cover on page 33).
3. Disconnect the battery cable from the system board (see Battery on page 43).
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the cable between the speakers from the clips along the bottom of the battery (2).
46 Chapter 6 Removal and replacement procedures for authorized service provider parts