User Guide

Setting up the monitor
WARNING!
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
workstation setup and proper posture, health, and work habits for computer users. The Safety & Comfort
Guide also provides important electrical and mechanical safety information. The Safety & Comfort Guide is
available on the Web at http://www.hp.com/ergo.
IMPORTANT: To prevent damage to the monitor, do not touch the surface of the LCD panel. Pressure on the
panel may cause nonuniformity of color or disorientation of the liquid crystals. If this occurs, the screen will
not recover to its normal condition.
IMPORTANT: To prevent the screen from getting scratched, defaced, or broken and prevent damage to the
control buttons, position the monitor facedown on a at surface covered with protective sheet foam or a
nonabrasive cloth.
Attaching the monitor stand
TIP: Consider the placement of the monitor, because surrounding light and bright surfaces might cause
interfering reections.
1. Position the monitor head facedown on a at surface covered by a protective sheet made of foam or a
clean, dry cloth.
2. Slide the connector on the stand’s arm onto the connector on the back of the monitor head. The stand’s
arm clicks into place when attached.
Setting up the monitor 5