User's Manual

To enable Webscan
1. Open the embedded web server. For more information, see Open the embedded web server on page 35.
2. Click the Settings tab.
3. In the Security section, click Administrator Settings.
4. Select Webscan from EWS to enable Webscan.
5. Click Apply.
To scan using Webscan
Scanning using Webscan oers basic scan options. For additional scan options or functionality, scan from the
HP printer software.
1. Load the original, print-side down, on the scanner glass, aligned with the top-left corner.
2. Open the embedded web server. For more information, see Open the embedded web server on page 35.
3. Click the Scan tab.
4. Click Webscan in the left pane, change any settings, and then click Start Scan.
72 Chapter 7 Copy, Scan, and Mobile Fax ENWW