Installation guide

Product

code

HP description

Max transmission

distance

JD096C HP X240 10G SFP+ SFP+ 1.2m DA Cable 1.2 m (3.94 ft)

JD097C HP X240 10G SFP+ SFP+ 3m DA Cable 3 m (9.84 ft)

JG081C HP X240 10G SFP+ SFP+ 5m DA Cable 5 m (16.40 ft)

Figure 45 SFP+ DAC cable

(1) Connector (2) Pull latch

For more information about the SFP transceiver modules, SFP+ transceiver modules, and SFP+ DAC

cables, see HP Comware-Based Devices Transceiver Modules User Guide

NOTE:

• HP recommends that you use HP 1000 Mbps SFP transceiver modules, SFP+ transceiver modules, or

SFP+ DAC cables for the SFP+ ports on the switch. The HP SFP and SFP+ transceiver modules and SFP+

DAC cables are subject to change over time. For the most up-to-date list of SFP and SFP+ transceiver

modules and SFP+ DAC cables, contact your HP sales representative or technical support engineer.

• The HP 5900AF-48G-4XG-2QSFP+ and HP 5900AF-48G-4XG-2QSFP+ TAA switches do not suppor

the SFP-XG-LX220-MM1310 transceiver module.

QSFP+ port

HP 5900 switches provide QSFP+ ports. You can plug the QSFP+ transceiver modules in Table 16 and

the QSFP+ DAC cables in Table 17 in the QSFP+ po

rts as needed.