Installation guide

49
NOTE:
USB devices from different vendors vary in compatibility and driver. HP does not guarantee correct
operation of USB devices from other vendors on the switch. If a USB device does not operate correctly on
the switch, replace it with one from another vendor.
SFP+ port
The following switches provide SFP+ ports:
• HP 5920AF-24XG.
• HP 5920AF-24XG TAA.
• HP 5900AF-48XG-4QSFP+.
• HP 5900AF-48XG-4QSFP+ TAA.
• HP 5900CP-48XG-4QSFP+.
• HP 5900CP-48XG-4QSFP+ TAA.
• HP 5900CP-48XG-4QSFP+8Gb FC B-F.
• HP 5900AF-48G-4XG-2QSFP+.
• HP 5900AF-48G-4XG-2QSFP+ TAA.
You can install the 1000 Mbps SFP transceiver modules in Table 13, the SFP+ tr
ansceiver modules
in Table 14, a
nd the SFP+ DAC cables in Table 15 in the SFP+ ports as needed. You can use the SFP+
ports as IRF physical ports to connect the switches in an IRF deployment.
Table 13 1000 Mbps SFP transceiver modules available for the SFP+ ports
Product
Code
HP description
Central
wavelength
(nm)
Connector
Cable/fiber
diameter
(μm)
Modal
bandwidth
(MHz ×
km)
Max
transmission
distance
JD089B
HP X120 1G
SFP RJ45 T
Transceiver
N/A RJ-45
Category-5
twisted pair
N/A
100 m
(328.08 ft)
JD118B
HP X120 1G
SFP LC SX
Transceiver
850 LC
Multi-mode,
50/125
500
550 m
(1804.46 ft)
400
500 m
(1640.42 ft)
Multi-mode,
62.5/125
200
275 m
(902.23 ft)
160
220 m
(721.78 ft)
JD119B
HP X120 1G
SFP LC LX
Transceiver
1310 LC
Single-mode,
9/125
N/A
10 km (6.21
miles)
Multi-mode,
50/125
• 500
• 400
550 m
(1804.46 ft)
Multi-mode,
62.5/125
500
550 m
(1804.46 ft)