Installation guide

12
NOTE:
• HP recommends that you use the primary grounding point or auxiliary
g
roundin
g
point 1 because the
grounding cable and grounding screw that come with the switch are suitable only for these two
grounding points.
• To use auxiliary grounding point 2, you must prepare a grounding cable yourself.
To connect the grounding cable:
1. Choose a grounding point.
2. Unpack the grounding cable and grounding screws.
3. Align the two-hole grounding lug at one end of the cable with the grounding holes of the
grounding point. Use the grounding screws to attach the grounding lug to the chassis, as shown
in Figure 8.
Figure 8 Attaching th
e rear mounting brackets/chassis rails/grounding cable to the chassis