Installation guide

7
Installing the switch
CAUTION:
Keep the tamper-proof seal on a mountin
g
screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence caused thereby.
Figure 1 Hardware installation flow
Installing the switch in a 19-inch rack
Rack requirements
The rack for the switch must meet the requirements described in Table 5.
Table 5 Requirements for the rack
Switch model Installation method Requirements for the rack
Yes
Ground the switch
Install the
switch
Start
Connect power cords
Verify the installation
Power on the switch
Operating correctly?
Power off the
switch
Troubleshoot the
switch
No
End
Install fan trays
Install power supplies