Installation guide

Item

HP 5900AF-48XG-4QSFP+

Fire resistance

compliance

UL60950-1, EN60950-1, IEC60950-1,

GB4943

HP 5900AF-48XG-4QSFP+ panel views

Figure 36 HP 5900AF-48XG-4QSFP+ front panel

(1) SFP+ port

(2) SFP+ port LED

(3) QSFP+ port

(4) QSFP+ port LED

(5) System status LED (SYS)

Figure 37 HP 5900AF-48XG-4QSFP+ rear panel

(1) Grounding screw (auxiliary grounding point 2)

(2) Management Ethernet port

(3) Console port

(4) Fan tray slot 1

(5) Fan tray slot 2

(6) Power supply slot 1

(7) Power supply slot 2

(8) LINK LED for the management Ethernet port

(9) ACT LED for the management Ethernet port

(10) USB port

NOTE:

 The HP 5900AF-48XG-4QSFP+ switch comes with the power supply slots empty and the filler modules for the slots

as accessories. You can install one or two power supplies for the switch as needed. In this figure, two 650W AC

power supplies are installed.

 The HP 5900AF-48XG-4QSFP+ switch also comes with the fan tray slots empty. You must install two fan trays for the

5900AF-48XG-4QSFP+ for adequate heat dissipation, and their models must be the same. In this figure, two

LSWM1FANSC fan trays are installed.

1 2

3 4 5

1 2 3 4 5 6 7