Installation guide

18
Connecting the power cord
Connecting the 650W AC power supply
To connect the 650W AC power supply:
1. Insert the female connector of the AC power cord supplied with the power supply into the power
receptacle on the power supply.
2. Use a cable tie to secure the power cord to the handle of the power supply, as shown in Figure 21.
3. Connect the other end of the power cord to an AC power outlet.
Figure 21 Connecting the 650W AC power supply
(1) Cable tie
(2) Tighten the cable tie to secure the power cord to the handle of the power supply
Connecting the 650W DC power supply
To connect the 650W DC power supply:
1. Unpack the DC power cord, identify the plug for connecting to the power supply, orient the plug with
the power receptacle on the power supply, and insert the plug into the receptacle (see Figure 22).
If you cannot insert the plug into the receptacle, re-orient the plug rather than use excessive force to
push it in.
2. Use a cable tie to secure the power cord to the handle of the power supply, as shown in Figure 21.
3. Connect the other end of the power cord to the DC power source.
1 2