QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Overview 1. 2. 3. 4. 5. 6. HP ProLiant BL620c Generation 7 (G7) Server Blade Two hot-plug small form factor (SFF) SAS/SATA/SSD bays 7. Four NC553i 10Gb FlexFabric adapter ports Power on/standby button 8. iLO 3 Management adapter port UID, health, and network adapter LEDs 9. HP P410i Smart Array flash cache connector 32 RDIMM slots supporting up to 1.0TB of DDR3-1333 10.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Overview http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html (Worldwide) HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html (Worldwide) HP BladeSystem c-Class Interconnect and Mezzanine Components QuickSpecs: http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html http://h18004.www1.hp.com/products/blades/components/c-class-adapters.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Overview Lower idle power that allows idling cores to be reduced to near-zero power independent of other cores, reducing server idle power consumption Meshed network of four Intel® QuickPath Interconnects (Intel® QPI) each up to 6.4GT/s (25.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Overview NOTE: SAS, SATA, and/or SSD drives cannot be mixed within the server. Network Controller: Controller Four (4) embedded HP NC553i 10Gb FlexFabric adapter ports supporting autosensing 10Gb/1Gb Ethernet, FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI boot.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Overview Operating System Support: Support Microsoft Windows, RHEL, SLES, Oracle Solaris, VMware, and Citrix XenServer Form Factor: Factor Full height, single wide server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures Enclosures: Enclosures HP offers two different c-Class server blade enclosures to meet your individual needs: The HP BladeSystem c7000 rack enclosure is 10U high and holds up to 8 HP ProLiant BL620c G7 servers
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processors Ten-Core Processors One or more of the Intel® Xeon® E7-2870 (2.40GHz/10-core/30MB, 6.40GT/s QPI, 130W) Processor following depending on NOTE: Offered as Configure-To-Order. See the Factory Integrated Models section for more details. model Intel® Xeon® E7-2860 2.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features Upgradeability Upgradeable to two processors NOTE: All processors within the server must be identical. NOTE: All servers support one or two processors. NOTE: The minimum processor configuration is one processor that must be installed in socket CPU1. NOTE: If upgrading an existing BL620c G7 server to a different processor, the server's ROM must be flashed to the latest BIOS prior to the upgrade.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features Network Controllers Four (4) integrated HP NC553i 10Gb FlexFabric adapter ports supporting 10Gb/1Gb autosensing Ethernet, FCoE, Flex-10, TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI boot. NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric 10Gb/24-port Module or HP 10GbE Pass-Thru Module.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features Fibre Channel Up to three (3) optional 4Gb and/or 8Gb Fibre Channel HBA mezzanine adapters (Brocade, Emulex and QLogic options). Compatible SAN HP ProLiant BL620c G7 server blades are optimized for HP MSA, EVA, and XPHP and are compatible with select third party SANs. See the blade storage page for more details at http://h18004.www1.hp.com/products/blades/components/c-class-sans.html.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features G7 or earlier BTO servers until the last supported server is no longer shipping. The Media Kit will not be updated past version 8.70. ProLiant G7 or earlier CTO servers are able to order the Media Kit with the understanding that the media is not updated. Please check specific server QuickSpecs for availability of CTO Kit.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features High Performance Clusters HP Cluster Platforms HPC Interconnects HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft Windows HPC Server.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features on a read transaction. DIMM Address/Control Bus Parity Protection provides a means to detect and protect command and address errors. Memory Failover uses a mirrored DIMM once a failed DIMM in a mirrored set is detected. Memory Mirroring provides a copy of memory stored with dynamic failover in case of failure within socket (intra-socket) memory mirroring. The system will operate in non-hemisphere mode when mirroring is enabled.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features system. On-Die Error Protection protects registers from particle hits. Storage Two hot-plug SAS/SATA/SSD drive bays. Integrated HP Smart Array P410i Controller with RAID 0 and 1 standard Integrated HP Smart Array P410i Controller upgradeable firmware with recovery ROM capability HP Smart Array P410i flash backed write cache (FBWC) options to 1GB.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features Industry Standard Compliance ACPI 2.0 Compliant PCI 2.2 Compliant Microsoft® Logo certifications USB 2.0 Secure Digital 2.0 TMP 1.2 IEEE (see the NC553i Technical Specifications section) Advanced Encryption Standard (AES) Triple Data Encryption Standard (3DES) SNMP SSL 2.0 Active Directory v1.0 (Windows 2003) IPMI 2.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Standard Features HP Enterprise Configurator The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. http://www.hp.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Service and Support Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment. That's why it makes sense to team up with the people who know HP infrastructure hardware and software best - the experienced professionals at HP Services.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Service and Support Standard Care Package Package that maintains high level of server availability HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000 enclosure Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and VPM http://h20195.www2.hp.com/V2/GetPDF.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Service and Support Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL series servers or HP BladeSystem servers http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf 1-Year HP Proactive Select 10 Credit Provides a flexible way to purchase HP best-in-class consultancy and technical services http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Models Intel Xeon E7-2800/8867L Models NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. NOTE: Not all models are available in all regions. Check with your local country HP offices for availability. (1) Intel® Xeon® E7-2860 (2.26GHz/10-core/24MB, 6.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Models Intel Xeon 6500 Models HP ProLiant BL620c G7 Processor(s) X6550 1P 8GB-R P410i One of the following Hot Plug SAS/SATA 2 SFF depending on model Server 588964-B21 HP ProLiant BL620c G7 E6540 1P 8GB-R P410i Hot Plug SAS/SATA 2 SFF Cache Memory Server One of the following 588965-B21 depending on model Memory HP ProLiant BL620c G7 E7530 1P 8GB-R P410i Network Controllers Hot Plug SAS/SATA 2 SFF Server 588963-B21 Storage Controller HP ProLiant
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Configuration Information - Factory Integrated Models NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on Factory Integrated Model product offerings and requirements.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Configuration Information - Factory Integrated Models HP Memory HP BL620c G7 Intel® Xeon® E7-8867L (2.13GHz/10-core/30MB/105W) FIO Processor Kit Eight-Core Processors HP BL620c G7 Intel® Xeon® E7-2830 (2.13GHz/8-core/24MB/105W) FIO Processor Kit HP BL620c G7 Intel® Xeon® E7-2820 (2.0GHz/8-core/18MB/105W) FIO Processor Kit HP BL620c G7 Intel® Xeon® X7560 (2.26GHz/8-core/24MB/130W) FIO Processor Kit HP BL620c G7 Intel® Xeon® X6550 (2.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Configuration Information - Factory Integrated Models HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP Memory Kit NOTE: This memory kit is only available on the Intel Xeon BL620c G7 E72800/8867L series models.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Core Options NOTE: For additional "Core Options" and "Additional Options" please see the options sections below. Gigabit Ethernet Mezzanines HP Ethernet Mezzanine Options HP NC325m PCI Express Quad Port Gigabit Server Adapter HP NC360m Dual Port 1GbE BL-c Adapter NOTE: The HP NC360m is only available on the BL620c G7 Intel Xeon E72800/8867L series models.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Core Options HP Processors NOTE: The BL620c G7 supports one or two processors. NOTE: The minimum processor configuration is one processor that must be installed in socket CPU1. NOTE: All processors within the server must be identical. NOTE: All -B21 processor kits listed below contain one (1) processor.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Core Options HP Memory NOTE: All DDR3 memory option kits consist of one RDIMM per kit. NOTE: PC3L is a low-voltage memory and is only available on the BL620c G7 Intel Xeon E7-2800/8867L series models. NOTE: See the "Memory" section for memory guidelines, installation rules, and additional general information.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Core Options HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive HP 500GB 6G SAS 7.2K rpm SFF (2.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Additional Options HP Insight Software Insight Control HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic License HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server License HP Insight Management Media Kit NOTE: HP Insight Management Media Kit contains DVDs without licenses.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Additional Options http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html (Worldwide) HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote Management HP iLO Advanced for BladeSystem including 1yr 24x7 Support Electronic License HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License NOTE: Licenses ship without media.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Additional Options High Performance Clusters HP Storage Controllers HP Cluster Management Utility HP Cluster Management Utility Flexible License NOTE: This part number can be used to purchase one certificate for multiple licenses with a single activation key. Each license is for one node (server). Customer will receive a printed end user license agreement and license entitlement certificate via physical shipment.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Additional Options HP 512MB Flash Backed Write Cache NOTE: This is an option for the HP Smart Array P410i Controller (P410i is standard integrated controller). HP 1GB Flash Backed Cache NOTE: This is an option for the HP Smart Array P410i Controller (P410i is standard integrated controller). HP Smart Array P-Series Low Profile Battery NOTE: Supports the HP Smart Array P700m Controller.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Additional Options HP Ultrium Tape Blades HP Expansion Blade HP LTO-4 SB1760c Tape Blade HP LTO-5 SB3000c Tape Blade NOTE: The HP PCI Express Mezzanine Pass-Thru Card (P/N 431643-B21) is required to support the Ultrium Tape Blades with the BL620c G7. Up to two storage blades are supported per server mix and match (Ultrium Tape, PCI Expansion Blades, and/or Storage Expansion Blades).
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Additional Options HP Security - TPM HP Trusted Platform Module Option NOTE: The BL620c G7 server includes a Trusted Platform Module (TPM) connector for an optional TPM 1.2 upgrade. The TPM 1.2 option is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Memory Memory Subsystem Architecture For maximum memory bandwidth, performance, and capacity, each Intel® Xeon® E7-2800/8867L and 6500/7500 series processor socket contains two memory controllers. Each memory controller connects to two Intel® Scalable Memory Buffers (SMB) for a total of four SMBs per processor. Each SMB connects to four RDIMMs for a grand total of sixteen RDIMMs per installed processor (32 total RDIMMs per BL620c G7 server).
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Memory Up to 832GB of memory is available with the installation of optional DDR3 RDIMM memory expansion kits (BL620c G7 Intel Xeon E7-2800/8867L models). Up to 464GB of memory is available with the installation of optional DDR3 RDIMM memory expansion kits (BL620c G7 Intel Xeon 6500/7500 models). Model Standard Memory Replaced with Optional Memory Up to 1.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Memory Memory Standard 8GB total Optional 232GB per CPU (464TB total) Processor 1 RDIMM Slots (Processor 2 has the same RDIMM slot numeration, but all slots are empty) 1G 3E 4A 5A 6E 7C 8G 2C Empty Empty Empty Empty 4GB 4GB Empty Empty 9H 10D 11F 12B 13H 14D 15F 16B Empty Empty Empty Empty Empty Empty Empty Empty Processor 1 RDIMM Slots (Processor 2 has the same RDIMM configuration) 1G 2C 3E 4A 5A 6E 7C 8G 16GB 16GB 16GB 4GB 4GB 16GB 16GB 16
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Memory NOTE: All DDR3 memory option kits consist of one RDIMM per kit. NOTE: PC3L is a low-voltage memory and is only available on the BL620c G7 Intel Xeon E7-2800/8867L series models. NOTE: For detailed memory configuration rules and guidelines, please see the BL620c G7 user guide at: www.hp.com/support and use the Online DDR3 Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Storage 1-2 2 x SFF SAS/SATA/SDD hot-plug hard drives Hard Drives NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components. NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Storage 6G SAS Hot Plug Enterprise Performance Solid State Drives Quantity Position Supported Supported 400GB 6G SAS SLC 2 1-2 200GB 6G SAS SLC 6G SAS Hot Plug Enterprise Mainstream Solid State Drives Quantity Position Supported Supported 800GB 6G SAS MLC 2 1-2 400GB 6G SAS MLC 200GB 6G SAS MLC DA - 13747 Controller HP Smart Array P410i Controller Controller HP Smart Array P410i Controller Worldwide — Version 22 — March 6, 2012 Page 39
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Technical Specifications System Unit Dimensions (H x W x D) Weight (approximate) Full height, single-wide server blade: 14.46 x 2.19 x 20.09 in (36.73 x 5.49 x 51.03 cm) Maximum 24.24lbs (11.00kg) (all hard drives, DIMMs, mezzanine cards, and processors installed) Minimum 17.9lbs (8.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Technical Specifications Enclosures QuickSpecs located at: HP BladeSystem c3000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12790_div/ 12790_div.html HP BladeSystem c7000 Enclosure QuickSpecs: http://h18000.www1.hp.com/products/quickspecs/12810_div/ 12810_div.
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Technical Specifications 10Gb Ethernet ort 1Gb Ethernet autosensing Microsoft TCP chimney compliant Supports 8 Physical Functions (PF) Supports 128 Virtual Functions (VF): Up to 32 VFs per PF Support 128 MAC address Traffic Shaping and QoS across each VF and PF: NIC Fine-grain QoS 10 Mbps to 10Gbps in steps of 10Mbps HBA fine-grain QoS 1000 IOPs to 500,000 IOPs in steps of 1000 IOPS On-chip VM-VM switching Traffic steering and isolation Hardware
QuickSpecs HP ProLiant BL620c Generation 7 (G7) Server Blade Technical Specifications Client Browser Support Command Line Support Security Microsoft Internet Explorer 8 Microsoft Internet Explorer 7 Microsoft Internet Explorer 6 Firefox 3.5 (on supported Windows and Linux systems) Firefox 3.
