Reference Guide

Full Command and Function Reference 3-89
Access: …µ FONT 6
Input/Output:
Level 1/Argument 1 Level 1/Item 1
→
Font object
See also: FONT7, FONT8, →FONT, FONT →
FONT7
Type: Function
Description: Font Function: Returns the system FONT7 object. You use this in conjunction with the
→FONT command to set the system font to type 7.
Access: …µ FONT 7
Input/Output:
Level 1/Argument 1 Level 1/Item 1
→
Font object
See also: FONT6, FONT8, →FONT, FONT →
FONT8
Type: Function
Description: Font Function: Returns the system FONT8 object. You use this in conjunction with the
→FONT command to set the system font to type 8.
Access: …µ FONT 8
Input/Output:
Level 1/Argument 1 Level 1/Item 1
→
Font object
See also: FONT6, FONT7, →FONT, FONT →
FONT →
Type: Function
Description: Returns the current system font.
Access: …µ FONT →
Input/Output:
Level 1/Argument 1 Level 1/Item 1
→
Font object
See also: FONT6, FONT7, FONT8, → FONT
→ FONT
Type: Function
Description: Set font Function: Sets the system font. You use this in conjunction with one of the three font
commands to set the system font. Valid input is any font object (TYPE 30) of size 6, 7, or 8.
Access: …µ → FONT
Input/Output:
Level 1/Argument 1 Level 1/Item 1
Font object
→
See also: FONT6, FONT7, FONT8, FONT →