Command Reference Guide
3Com Router 5000 Family and Router 6000 Family isdn calling ● 177
Command Reference
isdn calling
Use the isdn calling command to have the messages from a calling party to a
called party carry the calling number.
Use the undo isdn calling command to delete calling number in the messages
that a calling party transmitted.
Syntax isdn calling calling-number
undo isdn calling
Parameters calling-number
Calling number.
Example Configure the message from a calling party to a called party on interface Bri0/0/0 to
carry calling number.
[3Com-Bri0/0/0] isdn calling 8060170
View This command can be used in the following views:
■ ISDN Interface view
Description This command mainly applies on BRI interfaces. If a calling party has configured this
command on its BRI interface, the call party will be able to see the calling number by
viewing the call history information.